NaplesGarage Doors & Gates
Two-car garage door on a Naples home at sunset

Broken spring? Don’t open the door.

Garage door spring repair in Naples

A broken spring is the most common reason a garage door won’t open. We replace torsion and extension springs, usually the same day you call, and rebalance the door so it lifts safely.

  • Same-day when available
  • Matched to your door’s weight
  • Price before work starts

Get a free estimate

Tell us what’s going on. A local technician calls you back, and urgent jobs come first.

How soon?
Add email, location, details or photos (optional)

No spam, no obligation. By submitting you agree we may call or text you about your request (reply STOP to opt out). See our privacy policy. Prefer to talk? (239) 880-8770

Signs your garage door spring is broken

If you heard a loud bang from the garage and now the door won’t open, a spring has almost certainly broken. Springs counterbalance the door’s weight, often 130 to 400+ pounds, so when one snaps, the opener can’t lift the door on its own.

  • A visible gap in the coiled spring on the bar above the door
  • The door rises a few inches, then stops or reverses
  • The door feels extremely heavy when lifted by hand
  • Loose or hanging lift cables
  • The opener hums, strains or clicks but the door doesn’t move

What to do now: leave the door closed, don’t keep pressing the opener (it can strip the gears), and don’t try to adjust the spring yourself. Call (239) 880-8770. If your car is trapped, tell us and we’ll prioritize it.

Torsion vs. extension springs

Torsion springs sit on a steel bar above the door and twist to lift it. They’re on most Naples homes built in the last 25 years, last longer, and run more smoothly. Extension springs stretch along the horizontal tracks on each side; they’re common on older single-car doors and must have safety cables running through them so a broken spring can’t whip loose.

Converting an older extension-spring door to a torsion system is often worth it when you’re replacing springs anyway. Ask and we’ll quote both. For reference, Angi’s 2026 data puts a national extension-to-torsion conversion at $400 to $800 (Angi).

Torsion springsExtension springs
WhereOn a bar above the doorAlong the horizontal tracks on each side
How they workTwist (wind) to store energyStretch to store energy
Common onMost newer Naples homes, double doorsOlder and lighter single-car doors
Ride qualitySmoother, better balanceCan jerk as springs stretch
SafetyContained on the barMust have safety cables through each spring
Our price$200 to $350 single, $275 to $550 pair$180 to $320 pair with safety cables

What spring replacement costs in Naples

Most spring jobs fall between $200 and $550 installed. The price depends on spring size (set by your door’s weight and height), whether there are one or two springs, and whether cables or rollers also need replacing.

Typical garage door repair and installation prices in Naples, FL (November 2026)
JobTypical price
Torsion springs (pair)$275 to $550
Extension springs (pair) with safety cables$180 to $320
Lift cables replaced$150 to $350
Opener repair$100 to $350
New belt-drive opener, installed$450 to $900
New double-car door, wind-rated$2,800 to $8,000

Naples-area ranges, updated November 2026. Your exact price is quoted on site before work begins.

How we replace springs

  1. Weigh and measure. We size springs to your actual door weight, not just copy the old ones, which may have been wrong.
  2. Replace in pairs on two-spring doors, with oil-tempered or galvanized springs suited to coastal air.
  3. Inspect cables, drums, bearings and rollers: a broken spring often frays cables.
  4. Balance and test. The door should stay put when lifted halfway by hand. We test the opener’s force settings and auto-reverse.

Why springs fail early near the Gulf

Every spring is rated for a set number of cycles, typically about 10,000 for standard springs, or roughly 7 years at four cycles a day. High-cycle springs are rated for 25,000 or more. In Naples, salt air and humidity add corrosion: rust pits the steel and creates weak points where springs snap. The door industry’s own guidance (DASMA) notes that rust reduces a spring’s wire and corrosion pits speed up fatigue cracks. Coastal homes benefit from galvanized, coated or high-cycle springs and a lubrication visit every six months. See our salt-air maintenance service.

Standard vs. high-cycle springs

A spring’s life is measured in cycles (one open plus one close), and high-cycle springs simply last more of them. Ratings vary by manufacturer, but standard residential springs are commonly rated around 10,000 cycles and high-cycle springs at 25,000 or more. DASMA’s technical data sheet on spring life explains how wire size and corrosion affect that number (DASMA TDS-190).

SpringTypical ratingAt 4 cycles a dayBest for
StandardAbout 10,000 cyclesRoughly 7 yearsLight use, budget repairs
High-cycle25,000 cycles or moreRoughly 17 years or moreBusy garages, the main entry to the house

The years column is simple arithmetic, not a guarantee: salt air, humidity and an unbalanced door all shorten real-world life. If your family uses the garage as the front door, high-cycle springs usually cost less per year.

Why DIY spring replacement is dangerous

Torsion springs store enough energy to lift a door weighing hundreds of pounds, and releasing that energy by accident can cause serious injury. Winding a spring takes proper winding bars, the right number of turns for your door, and knowledge of which parts are under tension, including the bottom brackets and cables. Online videos make it look simple, but a slipped bar or the wrong spring size is how most garage door injuries happen. Spring replacement is one job to leave to a trained technician.

How Naples prices compare

Our installed prices are $200 to $350 for a single torsion spring and $275 to $550 for a pair, including balancing and a safety check. Nationally, Angi’s 2026 data puts spring replacement at an average of $250, with most jobs between $150 and $350 (Angi). Pairs, heavy doors, high-cycle or coated springs and extra parts like cables move a job toward the top of the range. See all prices in the repair cost guide.

Spring repair across Naples

We replace springs throughout Naples, Marco Island, Bonita Springs and Estero. Waterfront homes in Old Naples, Port Royal and on Marco Island see the most rust-related failures; Pelican Bay and North Naples homes often still have their original builder-grade springs. Seasonal residents can book a pre-season check so a tired spring is replaced before it snaps. See all service areas. If a spring has broken and your car is stuck inside, call for emergency service.

Related repairs

A door that came down hard after a spring broke may also need cable, roller or track repair. If the opener strained against a broken spring, we’ll check it too. See opener repair.

Straight talk

What goes wrong with garage door companies, and how we avoid it

The same problems show up again and again in homeowner reviews. Here is each one, and what you can expect from us instead.

  • The price jumps after the technician arrives

    A low phone quote or a $29 to $89 “service call” turns into a bill several times larger once the truck is in the driveway, with fees nobody mentioned.

    You get a written, itemized price for the specific repair and approve it before any work starts. Typical prices are published on our cost guide.

  • One broken spring becomes a “full rebuild”

    A single failed part turns into new drums, cables, rollers and an opener, often pitched with urgency or scare language.

    We repair what failed. If other parts are worn, we say whether they need doing now or can wait, and replacement is only recommended when a door is beyond a sensible repair.

  • The door fails again a week later

    Cables come off or the opener strains soon after a repair, usually because the springs weren’t sized to the door’s weight or the door was never balanced.

    Springs are sized to your door’s actual weight, and every repair ends with a balance test and an auto-reverse safety test before we leave.

  • Cheap or mystery parts

    Low-cycle springs, plain steel hardware or a budget opener get installed, and the invoice doesn’t say what was used.

    On coastal homes we use sealed nylon rollers and galvanized or stainless hardware where available, and offer high-cycle springs.

  • A new door installed without a permit or the right wind rating

    Skipping the permit saves the installer time, but it can cause problems with insurance, wind-mitigation credits, inspections and selling the home.

    Every new door we quote is wind-rated for your opening and includes the permit, removal of the old door and the inspection.

  • Rust and corrosion near the Gulf

    Springs, brackets, fasteners and tracks pit and rust years earlier than inland, and fail suddenly.

    We recommend coastal-grade hardware and a tune-up every six months for homes near the water.

Red flags to watch for with any company

FAQ

Garage Door Spring Repair: common questions

How much does garage door spring replacement cost in Naples?

A single torsion spring typically costs $200 to $350 installed, and a pair $275 to $550, including balancing the door and a safety check. Extension springs on older doors usually run $180 to $320 for the pair with safety cables. You get the exact price before we start.

Should I replace both springs if only one broke?

Usually yes. On a two-spring door both springs have done the same number of cycles, so the second one is close to failing too. Replacing the pair costs less than a second service call and keeps the door balanced.

Can I replace a garage door spring myself?

We don’t recommend it. Torsion springs hold enough stored energy to cause serious injury, and they must be wound to the door’s exact weight. Spring work is the most common cause of garage door DIY injuries.

How do I know my garage door spring is broken?

Signs include a loud bang from the garage, a visible gap in the spring above the door, the door feeling extremely heavy, the opener straining or the door rising a few inches and stopping, and cables hanging loose.

How long do garage door springs last in Florida?

Standard springs are commonly rated around 10,000 cycles, often 7 to 10 years. Near the Gulf, corrosion can shorten that. High-cycle and coated springs last longer and are worth considering on a busy garage.

How long does it take to replace torsion springs?

Usually one to two hours on site, including measuring the door, installing the springs, checking cables and drums, balancing the door and testing the opener’s safety reversal. Same-day replacement is often possible because our trucks carry common spring sizes.

How do I know what spring I need?

A replacement spring is matched by wire size, inside diameter, length and wind direction, and sized to the door’s actual weight. The industry color-code system (DASMA TDS-171) helps identify springs, but we weigh the door rather than copy an old spring that may have been the wrong size.

What happens if I keep using a door with a broken spring?

The opener ends up lifting the full weight of the door, which can strip its gears or burn out the motor, and the door can drop suddenly. Leave the door closed, unplug the opener, and call for a spring replacement.

Get it fixed right, and priced up front.

Call a local technician now, or send a few details and we’ll call you back with a clear quote.